OFS are looking for the following positions:
  • Crane Operators
  • Mechanical Fitters & Fitters Mates
  • Riggers (NVQ LV3)
  • Fitters Mates/ Labourers/ General Operatives
  • Forklift Drivers
Requirements
  • Experience working on Industrial Gas Turbines of Siemens, Mitsubishi and General Electric design is essential
  • Must have the ability to perform routine maintenance activities and overhaul activities.
  • Experience of more than 5 times working for overhaul of large scale gas turbine or steam turbine
  • we would expect the successful candidates to have the following:
  • CCNSG Safety Passport
  • Written proof they are meidcally fit to work
Must be willing to travel and available to work in the UK for the duration of the project.

To Apply Click Here

Search JN10167

Role Description

Main Duties & Responsibilities of Mechanical Fitter

  • Use workshop equipment such as milling machines, lathes, etc.
  • Set and adjust machine tools and equipment.
  • Disassemble and/or assemble large rotational mechanical components and equipment to meet required specifications.
  • Position and install mechanical plant and equipment and record measurements using precision measurements equipment.
  • Heat bolts for stretching and record all relevant measurements.

Health and Safety Compliance

  • Ensure compliance with OFS’s & the customer’s Health, Safety & Environmental policies and procedures.
  • Complete necessary Health and Safety Forms.
  • Adhere to Health and Safety policies and procedures including use of proper protective clothing.
  • To ensure excellent customer interface and relations
  • If required, liaise effectively with customers in job execution.
  • Provide customers with high quality, value added service
  • Treat OFS’s customers with respect and courtesy and make every effort to facilitate any reasonable request for assistance

Requirements

  • Experience working on Industrial Gas Turbines of Siemens, Mitsubishi and General Electric design.
  • Applicants must have proven experience.
  • Must have proven mechanical fitter experience working on industrial gas turbines
  • Experience in other mechanical rotating equipment is an advantage
  • Attention to detail, dedicated, able to work within small or large maintenance team environment.

Candidates must have the following:

  • CCNSG Safety Passport
  • Basic awareness training in Manual Handling, Working at Height and Confined Spaces.
  • Medical Fit for Work

To Apply Click Here

Role Description

Main Duties of Crane Operator

  • Responsible for the safe operation of various types and capacities of cranes
  • Responsible to operate electric or diesel-powered cranes to lift and move material and objects.
  • Start engine and drive crane as required and to steer the crane by pushing or pulling on levers and pressing pedals that control motion of crawler crane
  • Observe load hook up and safety of load, mover’s materials and observe indicator to insure that lift is within the lifting capacity of the crane
  • Inspect crane for defective parts and notifies supervisor of mechanical or electrical malfunction
  • Manipulate or depress cane controls to regulate speed and direction of crane and hoist movement according to written, verbal, or signal instructions.
  • Inspect crane for safety issues on a daily basis.
  • Determine if any parts are malfunctioning.
  • Place blocks and outriggers to prevent capsizing when lifting heavy loads.
  • Work with in precise limits and standards of accuracy.
  • Bolt boom sections together to extend or modify boom for pile driving or high lifting.
  • Start and stop crane engine.
  • Follow directions carefully.
  • Work within company policy and recognized safety rules.

Health and Safety Compliance

  • Ensure compliance with OFS’s & the customer’s Health, Safety & Environmental policies and procedures.
  • Complete necessary Health and Safety Forms.
  • Adhere to Health and Safety policies and procedures including use of proper protective clothing.
  • To ensure excellent customer interface and relations
  • If required, liaise effectively with customers in job execution.
  • Provide customers with high quality, value added service
  • Treat OFS’s customers with respect and courtesy and make every effort to facilitate any reasonable request for assistance.

Requirements

  • Experience working as a crane driver and operator
  • Experience working in heavy engineering sector on large industrial gas turbines would be desirable.
  • Applicants must have at least proven experience.
  • Candidate shall have experience operating cranes and heavy loads (105 tons), preferably with experience in overhaul activities for large scale gas turbines or steam turbines.
  • Attention to detail, dedicated, able to work within small or large maintenance team environment.

Candidates must have the following:

  • CCNSG Safety Passport
  • Basic awareness training in Manual Handling, Working at Height and Confined Spaces.
  • Medical Fit for Work

To Apply Click Here

Role Description

Main Duties of a Fitter Mate /Labourer

  • Required to assist with duties such as Gas Turbine disassembly, component refurbishment /overhaul and assembly.
  • Assist Mechanical Fitters with handling of mechanical tools and other materials.
  • Knowledge of the mechanical tools
  • Work to support the Mechanical Fitters, Gas Turbine Technicians and other personnel onsite.
  • Actively take part in risk assessment and all related Health and Safety issues.
  • Ensure the correct use and condition of all relevant tools and equipment within safety guidelines as necessary for the completion of works.

Health and Safety Compliance

  • Ensure compliance with OFS’s & the customer’s Health, Safety & Environmental policies and procedures.
  • Complete necessary Health and Safety Forms.
  • Adhere to Health and Safety policies and procedures including use of proper protective clothing.
  • To ensure excellent customer interface and relations
  • If required, liaise effectively with customers in job execution.
  • Provide customers with high quality, value added service
  • Treat OFS’s customers with respect and courtesy and make every effort to facilitate any reasonable request for assistance.

Requirements

  • Experience working on Industrial Gas Turbines of Siemens, Mitsubishi and General Electric design.
  • Applicants must have proven experience.
  • Assist with handling mechanical tools and other material.
  • Ability to identify all mechanical tools and consumables.
  • Assist with rigging.
  • Attention to detail, dedicated, able to work within small or large maintenance team environment.
  • we would expect the successful candidates to have the following:
  • CCNSG Safety Passport
  • Basic awareness training in Manual Handling, Working at Height and Confined Spaces.
  • Medical fit for work

To Apply Click Here

Role Description

Main Duties of an AP Rigger

  • Act as Appointed Person
  • Select suitable lifting gear/wire to lead lift-up and down of parts/components.
  • Competent with load weight, centre of gravity, rigging and rigging configuration.
  • Work on the overhaul assignment to handle and moves loads.
  • Demonstrate knowledge to perform rigging related functions for outage and overhaul of large gas turbines and auxiliary equipment.
  • Competent with inspection and use of rigging equipment.
  • Identify and coordinate rigging with knowledge of hitch configuration, capacities, load angle factors, rigging capacities, and load integrity, while recognising the associated hazards.
  • Identify lift points and estimate load weight for lifting.
  • Understand load dynamics and associated hazards
  • Maintain good housekeeping conditions in workshop and work sites
  • Fully support and participate in the Safety and Regulatory Compliance Programs.
  • Complete other tasks as assigned by the Foreman and OEM Engineers.

Health and Safety Compliance

  • Ensure compliance with OFS’s & the customer’s Health, Safety & Environmental policies and procedures.
  • Complete necessary Health and Safety Forms.
  • Adhere to Health and Safety policies and procedures including use of proper protective clothing.
  • To ensure excellent customer interface and relations
  • If required, liaise effectively with customers in job execution.
  • Provide customers with high quality, value added service
  • Treat OFS’s customers with respect and courtesy and make every effort to facilitate any reasonable request for assistance.

 

Requirements

  • Experience working on Industrial Gas Turbines of Siemens, Mitsubishi and General Electric design.
  • To select suitable lifting gear/wire to lead lift-up and down of parts/components.
  • Qualified rigger with evidence.
  • Experience of more than 5 times working for overhaul of large scale gas turbine or steam turbine.
  • Attention to detail, dedicated, able to work within small or large maintenance team environment.
  • We would expect the successful candidates to have the following:
  • CCNSG Safety Passport
  • AP Certification essential
  • Basic awareness training in Manual Handling, Working at Height and Confined Spaces.
  • Medical fit for work

To Apply Click Here

Role Description

Main Duties of a Rigger

  • Select suitable lifting gear/wire to lead lift-up and down of parts/components.
  • Competent with load weight, centre of gravity, rigging and rigging configuration.
  • Work on the overhaul assignment to handle and moves loads.
  • Demonstrate knowledge to perform rigging related functions for outage and overhaul of large gas turbines and auxiliary equipment.
  • Competent with inspection and use of rigging equipment.
  • Identify and coordinate rigging with knowledge of hitch configuration, capacities, load angle factors, rigging capacities, and load integrity, while recognising the associated hazards.
  • Identify lift points and estimate load weight for lifting.
  • Understand load dynamics and associated hazards
  • Maintain good housekeeping conditions in workshop and work sites
  • Fully support and participate in the Safety and Regulatory Compliance Programs.
  • Complete other tasks as assigned by the Foreman and OEM Engineers.

Health and Safety Compliance

  • Ensure compliance with OFS’s & the customer’s Health, Safety & Environmental policies and procedures.
  • Complete necessary Health and Safety Forms.
  • Adhere to Health and Safety policies and procedures including use of proper protective clothing.
  • To ensure excellent customer interface and relations
  • If required, liaise effectively with customers in job execution.
  • Provide customers with high quality, value added service
  • Treat OFS’s customers with respect and courtesy and make every effort to facilitate any reasonable request for assistance.

Requirements

  • Experience working on Industrial Gas Turbines in particular of Mitsubishi design.
  • Qualified rigger with evidence and must have proven experience.
  • To select suitable lifting gear/wire to lead lift-up and down of parts/components.
  • Experience of more than 5 times working for overhaul of large scale gas turbine or steam turbine.
  • CSCS or CPCS certified
  • Attention to detail, dedicated, able to work within small or large maintenance team environment.

Candidates must have the following:

  • CCNSG Safety Passport
  • Basic awareness training in Manual Handling, Working at Height and Confined Spaces.
  • Medical Fit for Work

To Apply Click Here

Main Duties of a General Operative

  • Required to assist with duties during Power Station Outages
  • Assist with the handling of mechanical tools and other materials
  • Work to support the all personnel with various tasks
  • Actively take part in risk assessment and all related Health and Safety issues.
  • Ensure the correct use and condition of all relevant equipment within safety guidelines as necessary for the completion of tasks

Health and Safety Compliance

  • Ensure compliance with OFS’s & the customer’s Health, Safety & Environmental policies and procedures.
  • Complete necessary Health and Safety Forms
  • Adhere to Health and Safety policies and procedures including use of proper protective clothing.
  • To ensure excellent customer interface and relations
  • If required, liaise effectively with customers in job execution.
  • Provide customers with high quality, value added service
  • Treat OFS’s customers with respect and courtesy and make every effort to facilitate any reasonable request for assistance.

Requirements

  • Applicants must have proven experience.
  • Assist with handling mechanical tools and other material.
  • Ability to identify all mechanical tools and consumables.
  • Assist with rigging.
  • Attention to detail, dedicated, able to work within small or large maintenance team environment.
  • we would expect the successful candidates to have the following:
  • CCNSG Safety Passport
  • Basic awareness training in Manual Handling, Working at Height and Confined Spaces.
  • Medical fit for work

To Apply Click Here

Please visit our online portal here to register your interest in working with us.

Search JN10167